Breaking news! Onick optics' latest self-developed new photovoltaic power storage system PV-6000 is on the market recently! The photovoltaic power storage system is a mobile integrated product that can use clean energy (solar energy) for charging and energy storage. It integrates charging, storage and power supply. It is a safe, stable, environmentally friendly and portable photovoltaic power storage system. It uses a built-in high-energy-density lithium-ion battery to provide a stable AC and DC power output power system. It is regarded as a "large-scale outdoor power bank".
The Onick PV-6000 photovoltaic power storage system is a professional outdoor emergency power supply equipment developed by the Onick R&D team in response to the national call for energy conservation and environmental protection, to solve the power demand of professional customers in extreme environments without power grids, and to adapt to Onick's related products to create a full range of product ecosystems. It took a year to develop.
Onick PV-6000 photovoltaic power storage system can output up to 6000Wh. Our PV-6000 photovoltaic power storage system uses CATL ultra-low internal resistance cells, ternary lithium batteries, and high-efficiency inverters. All internal wires are made of high-quality American standard copper wires to comprehensively reduce internal power loss. The publicity parameters are all actual measurement results. Different from the civilian power storage products on the market, they are not falsely marked according to the cell capacity. What is marked is what you get.
You may not have any idea about 6000Wh (6 kWh)... Let me tell you what 6000Wh (6 kWh) can do?
Ultra-high power
The PV-6000 photovoltaic power storage system not only has high capacity, but also can stably carry 5000W load of electrical equipment at the same time. The actual rated power of 5000W peak power is about 2200W, and the actual load capacity is about 2000W. The actual peak power of 5000W rated power is about 10000W, and the actual load capacity is about 5000W.
Super fast charging
Onick PV-6000 can use multiple 36V photovoltaic panels to charge devices at the same time, supporting a maximum total power of 900W. Under ideal weather conditions, the charging efficiency is the same as that of fast charging with mains electricity. Fully charged in about 6 hours.
Exclusive embedded management software
The PV-6000 photovoltaic power storage system comes with Onick's exclusive embedded management software, which can display the power, operating temperature, charging animation, charging and discharging power and real-time voltage of each battery cell in real time. Onick's exclusive embedded management software also creates related algorithm logic to solve the industry problem of inaccurate power display when charging and discharging lithium battery-related products. The charging and discharging performance of our products: stable power display, while accurately displaying the real-time power of charging and discharging.
Multiple modes, mobile and portable
The PV-6000 photovoltaic power storage system is a dual-purpose mobile portable power storage system with two usage modes. When in a high-temperature environment outdoors, the box can be opened for use to facilitate battery heat dissipation and extend the use time. The cover of the box can also be used as a sunshade to avoid direct sunlight on the panel and abnormal charging and discharging caused by high temperatures. When in a low temperature environment, you can directly use the power interface on the side of the box without opening the box. The box plays a role of heat preservation during use, making the power last longer.
Multiple protections, safe and sturdy
We use BMS battery management protection system and focused MPPT photovoltaic controller, with built-in intelligent temperature control fan, real-time monitoring of equipment operation, and multiple intelligent protections.
Seven functions of BMS: overcharge protection, over-discharge protection, overvoltage protection, over-temperature protection, offline protection, short circuit protection, and balanced voltage;
Seven protections of inverter: overload protection, low voltage protection, overvoltage protection, leakage protection, overcurrent protection, short circuit protection, and high temperature protection;
Intelligent temperature control fan: The fan does not work in the low temperature state, which saves power and is quieter. When the temperature of the equipment is too high, the fan will work automatically to enhance heat dissipation and extend the service life of the product;
The shell is made of high-quality PP material, which has good flame retardancy, toughness and anti-static ability. The average wall thickness exceeds 5mm. The surface is matte frosted and it is not easy to leave scratches during use. Use stainless steel hardware to connect the hinges. It can bear 150kg, is waterproof, shockproof, dustproof, impact-resistant, corrosion-resistant, and resistant to high and low temperatures. It comes with an automatic pressure balancing valve that can adjust the pressure difference between the inside and outside of the box, making it easy to unpack and waterproof.
Application scenarios
The PV-6000 photovoltaic power storage system is small in size and light in weight, suitable for scenarios that require mobile use of electricity. It can be quickly charged when combined with solar panels, so it is widely used in outdoor activities and emergency rescue. It can be used for emergency rescue, emergency repair, surveying and maintenance, emergency backup power, military communications, and drill practice. The portable outdoor power supply can adapt to various harsh working environments and is widely used in communications, aviation, aerospace, military industry, railways, electricity, outdoor camping, power supply in remote areas, camping in uninhabited areas, fishing in the wild, car ignition and other scenarios.